Air Filter Element For Compressor

Customer Benefit

① Long spanlife under rate working conditions.

② Filtration performance up to 0.01micron and residual oil up to 0.001mg/m³ in according with ISO8573.1-2010 standard.

③ Low pressure drop, saving energy and cost for ownership.

④ Colorful element top cap, Spin-on for filter, easy operate and maintain.

Air Filter Element Feature

A. No-touch type, easy install and maintenance, save time and cost.

B. Double stainless steel support. Strength the constructionand prevent second pollution as rusted.

C. Deep-bed Multi-wrap borosilicate fiber glass, Large flow passages prevent high pressure drop and allow for a high dirt holding capacity.

D. Polyester needle felt sleeve unique coalescing action to quickly drain oil. 

Element Struction 

①FPM sealing ring ensures air tightness to achieve better filtering effect.

②The double-layer support mesh is made of stainless steel to ensure the strength of the air Filter Element. The layered filter design structure ensures the filter accuracy of the filter element and protects the glass fiber during the production process. At the same time, it avoids the damage of the Compressor Air Filter Element due to the rust of the material and the secondary effect of compressed air. Sub-pollution.

③The 96% porosity has a large ability to hold dust, and the service life can reach 6000-8000 hours. The general pressure difference is 0.17-0.25kg/cm, and the maximum is not more than 0.65kg/cm.

④The end cover is made of PA+GF material, under the pressure of 1.8Mpa, it can withstand 240℃ high temperature without deformation, -20℃ without embrittlement, and can resist general acid and alkali chemical corrosion, and withstand harsh compressed air environment.

⑤The high-quality special material of the outer layer of the cartridge filter element can condense water and oil, and has strong oleophobicity and hydrophobicity, preventing oil or water from being brought downstream again and ensuring filtration performance.

Element Technical Specification

Filtration Grade
	PF	AO	AA	AX	ACS	AR	AAR
Particle removal (ISO12500-3)	5μm	1μm	0.01μm	0.01μm	-	1μm	0.01μm
Outlet oil aerosol concentration  (ISO12500-1)	5mg/m³	0.6mg/m³	<0.01mg/m³	<0.001mg/m³	<0.004mg/m³	-	-
Filtration performance of Particle (ISO12500-3)	-	99.999+%	99.999+%	99.999+%	99.999+%	99.999+%	99.999+%
Filtration performance of oil (ISO12500-1)	50%	80+%	99.9+%	99.99+%	-	-	-
Element spanlife	6000 hours	6000 hours	6000 hours	6000 hours	2000-3000 hours	4000-6000 hours	4000-6000 hours
Filtration Type	Coalescence	Coalescence	Coalescence	Coalescence	Adsorption	Coalescence	Coalescence
Airflow direction	From inside to outside					From outside to inside

Picture of Filter Element