Air Compressor Filter for Painting

When you’re working with air compressors, air purification and filtration is an critical part of maintenance. Compressed air filters play an important role in your industrial air compressor system. Choosing the right Compressor Air Dryer filter not only increases the efficiency of your unit, but it can also reduce energy costs and protect your employees from harmful chemicals and particulates.

However, does all desiccant air filter work for your compressed air system? Well it is depending on your working conditions, the project you’re completing and how often you use your equipment, you’ll need to make an precise choice. This guide will detail how pipeline air filter work, why they’re important, what type of intake air filter to buy and when you should replace it.

①Assess the requirements of your application. Different industry require different solution.

②What type of filtration is needed? Coalesent filter material removes solid and liquid contaminants from gas streams. Particulate filter media removes solid from gas streams absorber media removes hydrocarbon vapors from gas streams.

③Any specific micron of filtration performance you required?

④What are the working conditions of your application? Mainly criteria of consider : Flow, working pressure, temperature,pressure loss,material of structure (stainless steel, aluminum alloy, mild steel, carbon steel)

⑤Filter flow rate from how much SCFM? Pressure drop should be less than **bar? For saving the cost and protect environment.

YUKA Air Filter Feature & Advantage

①Casing 100% Leakage-tested, with 15 years spanlife. Low overall cost for owner.

②No-touch Element design, easy to maintenance and repairement.

③Follow ISO8573.1-2010 Standard in Class 1 filtration performance. Protect your precise equipment and optimization your production efficiency.

④Low pressure drop, saving energy and money.

⑤Fitted for all application and all type of air compressor.

Technical Specification

Replacement and Spare Parts

Installation Tips of Compressed Air Filter

1. Clean the compressed air pipes and valves connected to the air inlet and outlet of the filter before installation.

2. Adopt the combination of main pipe filtration and terminal filtration to ensure the gas quality at the point of use.

3. When installing, the air inlet and outlet of the filter should be kept level, and the sewage outlet should be at the bottom. A certain space must be reserved in the vertical direction to facilitate the maintenance of the filter and the replacement of the filter element.

4. The filter of the screw air compressor should be installed in a ventilated and cool place, as close as possible to the air point, to reduce the influence of the pipeline on the quality of the filtered compressed air.

5. Install and use within the specified working pressure and working temperature range, and install all levels of filters in the correct order according to the air inlet and outlet instructions or the direction indicated by the arrow, from coarse to fine installation. Avoid bypass as much as possible during installation. Because the oil in the air is bypassed to the downstream of the filter and then sticks to the inner wall of the pipeline, it is difficult to find effective means to remove it.

6. The filter element should be replaced regularly. Carefully record the replacement time. It is recommended that the working time zone should not exceed 6000 hours.

7. The discharge time of the auto drain is suitable for draining the liquid water, and the discharge interval is subject to the water content in the pipeline;

8. Different grades of compressed air filters can be equipped with zero pressure loss floating ball drain valves or manual valves according to customer requirements.